24/7 emergency locksmith across Dublin · 20–30 min response Call now: 087 437 7600

Our Latest Articles

Engaged hinge bolt securing a door edge

Hinge Bolts for Doors: What They Do and How to Fit Them

October 29, 2026

A hinge bolt, also called a dog bolt or security hinge bolt, is a steel pin set into the hinge edge of a door. When the door is shut, the pin sits in a hole in the frame, so the door cannot be lifted away even if someone knocks out the hinge pins or cuts the hinges. It is one of the cheapest upgrades you can make to an outward-opening door, and it only works if it is fitted accurately. This guide explains how hinge bolts work, which doors need them, how to fit them and where a locksmith is the safer choice.

Ecslocksmiths
Strengthen Your Door Security
Ecslocksmiths provides lock installations and repairs in Dublin, including security upgrades for doors and homes.
Explore locksmith services

TL;DR

  • Hinge bolts are a backup on the hinge side of the door. They do not carry the door’s weight and they do not replace good hinges or a good lock.
  • They matter most on outward-opening doors with exposed hinges, and on timber doors generally.
  • Fit them in pairs, roughly 150mm from each end hinge, and align the pin and the frame hole precisely.
  • Do not drill into a fire door without checking the door’s certification first. Extra holes can undermine its fire performance.
  • If you are unsure about the door, the frame or the drilling, have a licensed locksmith fit them.

Table of Contents

What hinge bolts are and how they work

Most break-ins through a front door attack the lock side. A determined intruder who finds the lock too tough looks at the other edge. On an outward-opening door the hinges are on the outside, so the pins can be tapped out or the knuckles cut. Once the hinges give way, the door can be levered away from the frame on the hinge side, even while the lock is still locked.

A hinge bolt closes that gap. Surelock McGill describes the principle: a concealed pin is fitted into the door edge and projects on the hinged side, entering a keep in the frame as the door closes. A surface-mounted version is fixed to the door and sits in a keep or hole in the frame while the door is closed. Either way you get a mechanical interlock between door and frame that has nothing to do with the hinges.

Two points are worth knowing:

  • They are passive. There is no key, no handle and no moving part you have to operate. The bolt engages every time the door closes.
  • They are a backup, not a hinge. Hinge bolts do not bear the door’s weight. The hinges still do that job. The bolt only matters on the day someone attacks the hinges.

In Ireland, An Garda Síochána’s HS2 Home Security Doors guidance says hinge bolts strengthen a door against forced entry and reinforce its hinge side, and lists them among the additional security features for front access doors.

Hinge bolt, dog bolt, door bolt: clearing up the names

The terminology causes most of the confusion when people shop for these.

Term What it is Where it sits
Hinge bolt / security hinge bolt A pin in the door edge that engages a keep in the frame Hinge edge of the door, near each end hinge
Dog bolt Another name for a hinge bolt Same as above
Hinge protector A moulded plate or bar that fits over or beside the hinge, often with an engaging tongue On the hinge edge, often needing no routing
Surface (barrel) door bolt A sliding bolt you operate by hand, usually on the inside face Lock edge or top and bottom of the door
Dutch door bolt A bolt that joins the top and bottom leaves of a split door Across the meeting rail of the two halves

So a hinge bolt is not something you slide. A sliding barrel bolt is a separate product that you operate yourself. If you search for “dog bolts” you want the first row. A Dutch door is split in half, and its bolt holds the top and bottom leaves together, which is a different job altogether.

Which doors need hinge bolts

Outward-opening doors

This is the classic case. Joseph Giles’ technical sheet explains that security hinge bolts are especially useful on outward-opening timber doors with exposed hinges: if the hinges are damaged or removed, the engaged bolt prevents the door from being taken off the frame. Back doors, side doors, garage side doors, shed and outhouse doors, and many flat entrances onto a balcony or stairwell fall into this group.

Inward-opening doors that can be kicked or barged

Inward-opening doors have hinges on the inside, so the pins are protected. They are still attacked by kicking and shoulder barging, and hinge bolts add resistance on the hinge edge. One crime prevention guide advises fitting them to outward-opening timber doors with exposed hinges and to inward-opening doors exposed to kicking or barging, such as recessed front doors and private flat entrance doors.

Commercial doors

Pubs, restaurants and shops often have rear service doors that open outward onto a yard or lane, out of sight from the street. These are exactly the doors where hinge pins are exposed and an attacker can work unobserved. An Garda Síochána’s Retail Security Guide stresses protecting a premises from the perimeter inwards, with doors maintained to recognised security specifications. A rear door with exposed hinges and no hinge-side protection is a weak point in that perimeter.

If you manage several properties, it helps to survey all exterior doors in one visit and list each door’s opening direction, material and hinge type, so you can fit the right device on each.

Doors that are already strong

A certified high-security door set is built to resist attack as a unit. For Ireland, An Garda Síochána recommends external doors built to I.S. EN 1627:2011, PAS 24-2016 or equivalent, with hinge bolts listed as an additional feature. Where a manufacturer supplies a door to a standard such as PAS 24, hinge bolts or security pins are often required on outward-opening doors, because hinge removal is a known attack route. Check the door’s documentation before adding anything, since modifying a certified door set can affect its rating.

Choosing the right type

There are three broad families, and the right one depends on your door and frame.

Concealed bolts set into the door edge

These need a hole drilled into the edge of the door and a matching hole or keep in the frame. They are invisible once fitted, which is why some products are marketed as being impossible to see from inside or outside. They suit solid timber doors with enough thickness at the edge.

Surface-mounted bolts

These screw onto the door and engage a keep on the frame. They are quicker to fit and suit doors that cannot be drilled easily, though they are visible. Choose a heavy-duty steel product with fixings long enough to bite into the door and frame rather than thin plated screws.

Hinge protectors that need no routing

Some hinge protectors are designed for particular door profiles and fit without routing. One example is the MILA non-rout hinge protector, made for eurogroove profiles on residential doors or casement windows and installed without routing or preparation. These are useful on uPVC and composite doors, where drilling a timber-style hole is not an option. Always confirm the profile on your door before buying.

What to look for when buying

  • Material: hardened steel pin, not a thin zinc casting.
  • Pin diameter and projection: a stout pin that goes well into the keep.
  • Fixings: screws long enough to reach solid timber, with a keep that is fixed into the frame, not just the cladding or architrave.
  • Finish: match it to your hinges if the bolt is visible.
  • Compatibility: check it is suitable for your door material and opening direction.

How to fit hinge bolts

This is a job for a competent DIYer with the right tools, and it goes wrong when people rush the marking out. The steps below describe a typical concealed bolt in a timber door. Always follow the instructions that come with your product.

What you need

  • A pair or two of hinge bolts (fit them in pairs)
  • A tape measure, pencil and engineer’s square
  • A drill and a bit matched to the bolt’s diameter, plus a depth stop
  • A chisel for the keep, if your product has a plate
  • A little paint or lipstick to transfer the pin position onto the frame

Steps

  1. Mark the heights. Fit bolts in pairs: one about 150mm below the top hinge and the second about 150mm above the bottom hinge. On a tall or heavy door you may add a third between the hinges.
  2. Mark the door edge. Find the centre line of the door edge and mark it at each height with the square, so the hole runs straight.
  3. Drill the door edge. Use the correct bit with a depth stop, keeping the drill level and square to the edge. Test-fit the bolt body.
  4. Transfer the position to the frame. Put a dab of paint or lipstick on the end of each pin, close the door gently and the mark shows where the frame hole goes.
  5. Drill and fit the keep. Drill the frame hole, then fit the keep plate flush. Check the pin enters freely.
  6. Test. Open and close the door several times. It should shut without binding, and the pins should engage with a small clearance, not a tight jam.

The step people get wrong is alignment. Poor alignment between the bolt and the receiving hole can cause binding or stop the bolt engaging at all. A hole that is a millimetre off can be enough to make the door catch in damp weather, when the timber swells.

When the door will not open wide enough

If the door cannot swing far enough to let you drill into the edge and the frame, replacing the existing hinges with security hinges can be an easier alternative. That is an older piece of advice, but the logic holds: security hinges have an integral locking stud, so you get the same protection without cutting into the door.

Common installation mistakes

  • Fitting only one bolt, which leaves the other end of the door free to be sprung.
  • Fixing the keep to a thin architrave or the surface of a soft frame rather than to solid timber.
  • Drilling too close to the hinge screws and weakening the edge.
  • Leaving old, loose hinge screws in place. Replace them with longer screws that reach the frame studs, because a hinge bolt does nothing for hinges that are already working loose.

Do not drill a fire door without checking

Fire doors in flats, shared hallways and commercial premises are tested as a complete assembly. The Code of Practice for hardware on fire and escape doors says hardware must not impede or reduce the door’s ability to withstand fire, and it warns against drilling holes through timber fire doors and attaching large metal components without thinking through the consequences. Extra holes can let heat and smoke through a door that would otherwise hold for its rated time.

If your entrance door is a fire door, whether in an apartment block, a multi-unit building or a commercial premises, talk to the door manufacturer or a competent locksmith before fitting anything. If the door is damaged or no longer meets requirements, the better answer is often a replacement door set rather than adding hardware. For that, professional door installation is worth considering so the new door and frame match.

Also keep escape in mind. Hardware on escape routes should be easy to use and clearly identifiable, a point made in the Centre for Excellence in Universal Design’s guidance. Hinge bolts are passive and do not affect how you open the door from inside, which is one reason they suit escape routes better than extra bolts that someone must remember to slide back.

Licensing and building regulations

In Ireland, a locksmith who repairs, replaces or adds locks must be licensed by the Private Security Authority, as An Garda Síochána notes in the HS2 guidance linked above. The Authority also says that repairs to fittings such as handles, hinges or locking mechanisms in existing buildings must not result in a greater breach of building regulations. When you hire someone to drill into doors or frames, ask to see their PSA licence.

Tenants and landlords

If you rent, check your lease before altering a door. Hinge bolts leave small holes, and landlords often prefer to fit them themselves or approve the work. Property managers who look after several units can standardise on one product and fixing pattern so each door is done the same way.

Hinge bolts are one layer, not the whole answer

The Garda guidance is clear that how secure a door is depends on its material, the quality of the lock, and how well everything is fitted. Hinge bolts help, but they sit alongside the rest of the door set. A sensible order of priorities:

  1. The door and frame. A solid door in a sound frame, ideally certified to a recognised standard.
  2. The locking. A multipoint lock or a good cylinder with anti-snap protection, plus a quality night latch or deadlock. See our locksmith services for the options.
  3. The hinge side. Hinge bolts on outward-opening doors, long screws in the hinges, and hinge protectors where the profile allows.
  4. The surroundings. Lighting, sightlines and a clear view of rear doors.

Hinge bolts also do nothing if the lock is the weak link. A solid timber door with two good hinge bolts and a worn, old cylinder is still easy to defeat. Fix the weakest link first.

Our view on hinge bolts

We are asked about hinge bolts most often after a break-in or a scare, when the owner has found a back door marked around the hinge. Our honest view is that they are some of the best-value hardware on a door, as long as they go onto the right door and are aligned properly.

The things we check on a job are the opening direction of the door, the material and thickness of the edge, the state of the hinge screws and whether the door is a fire door. We would rather spend ten minutes on that than drill the wrong hole. A hinge bolt in a door that rubs or binds gets disabled by the householder within a month, which defeats the point.

Our view on hinge bolts — overview diagram

We also push back on one habit: buying the cheapest thin bolts and fixing them into a soft frame. If the keep is only held by short screws into a worn frame, an attacker simply pulls the frame apart. We would sooner fit one proper pair with the right fixings than a whole set of weak ones.

For pubs and restaurants with back doors onto lanes, we usually recommend looking at hinge protection along with a proper lock and a check of any panic bars and exit devices, since the rear door is both an exit route and a target.

— Barry

Get hinge bolts fitted in Dublin

If you would rather not drill your own door, our locksmiths fit hinge bolts and other security upgrades on residential and commercial doors across Dublin. We can check the door, frame and hinge screws first, advise on the right type and tell you if a fire door needs a different approach. You can see everything we do on our services page, or find your nearest team through our Dublin locksmith page.

Ecslocksmiths

For damaged or sagging doors, we also repair them: see our door repair service in Rathfarnham for an example of the local pages we run. If you are locked out, our emergency lockout assistance costs €85 to €120 one-off, and we offer free estimates for other work.

FAQ

Do hinge bolts stop a door being kicked in?

Not on their own. They stop the hinge side being forced or the door lifted off its hinges, and they add resistance along the hinge edge. Kick-ins usually target the lock side, so the lock, the keep and the frame matter just as much.

Do I need hinge bolts on an inward-opening door?

The hinge pins are protected on the inside, so the risk is lower. Hinge bolts still help on doors that can be kicked or barged, such as recessed front doors and private flat entrances. They are most valuable on outward-opening doors.

Can I fit hinge bolts on a uPVC or composite door?

Often not with a standard drilled bolt, because the door edge is not solid timber. Some hinge protectors are made for particular profiles and need no routing, so check the profile and the product’s stated compatibility. A locksmith can confirm what suits your door.

How many hinge bolts does a door need?

A pair is the usual minimum: one about 150mm below the top hinge and one about 150mm above the bottom hinge. A tall or heavy door may take a third between the hinges.

Sources

hinge bolts for doorssecurity hinge boltshinge bolts securitydog bolts for doorsdoor hinge bolts installation
Back to Blog

What services do locksmiths in Ireland actually offer?

It’s more than just unlocking doors. Most locksmiths provide:

Emergency lockouts (home, car, business)

Lock repairs and replacements

Key cutting and rekeying

Security upgrades (e.g. anti-snap locks)

Car key replacement

How quickly can you respond to an emergency?

In emergency situations, typical arrival times should be at your location within 20-30 minutes. There are always professional locksmiths on standby, ready to handle any lockout or security emergency, ensuring safety is never compromised.

Can a lockmsith help with high-security locks and systems?

Absolutely! Most locksmiths specialise in advanced high-security lock systems, including electronic locks, biometric security, smart locks, and keyless entry systems. The should be trained in the latest security technologies, ensuring that they can provide the highest level of protection for your home, office, or vehicle. Ask for a free expert consultation to help you choose the right security system for your needs.

Will a locksmith provide a warranty on there services?

Yes, all locksmiths should stand by the quality of there work and offer a 100% satisfaction guarantee. Most would by default offer a warranty on all services, ensuring that you receive the best craftsmanship and long-lasting results.

Can a locksmith open Cars

Yes, most locksmiths are trained to open cars.

How quickly can a locksmith get to me in an emergency?

Most locksmiths in Ireland offer 24/7 emergency callouts and typically arrive within 15–60 minutes, depending on your location and traffic. In Dublin, response times can be as fast as 10–30 minutes, especially for emergency lockouts.

Can a locksmith open my door without damaging it?

Yes A professional locksmiths use non-destructive entry methods first. Drilling is usually a last resort, not the default approach.

If someone immediately suggests drilling without inspecting the lock, that’s a red flag.

How much does a locksmith cost?

Costs vary depending on the service, time of day, and complexity of the job. A standard lockout is usually cheaper than replacing a lock. Emergency or late-night services may cost more.

Prices vary, but here’s a realistic guide:

Standard callout/labour: €85–€95

Lockout service: from ~€85–€120+

Lock replacement: depends on parts + labour

Important: Always ask for a full quote upfront and if there is a call out fee. Some companies advertise low prices but increase costs after arriving.

Prices can vary quite a bit… call around for quotes!

Can you make a key without the original?

Yes A professional locksmiths use non-destructive methods whenever possible. Damage usually only happens if the lock is faulty, high-security, or has already been tampered with.

Do locksmiths in Ireland need to be licensed?

Yes. In Ireland, all locksmiths must be licensed by the Private Security Authority (PSA).

If you’re hiring someone:

Ask for their PSA licence number

Avoid anyone who can’t prove credentials

By asking for the licence you avoid the scammers.

Providing Locksmith Services For More Than 30 Years in Dublin, lock outs, lock fitting, slam locks, car opening, commerical and domestic.

Quick Links

Home

About Us

Services

Testimonial

Faqs

Contact Us

All Dublin Areas

Malahide

00353874377600

Legal

Privacy Policy

Terms & Conditions